How to Tell If a Dining Table Is Well Made. Part 3 of "How to Tell the Quality of Fine Furniture" | Martin & MacArthur
PublishedHow to Tell If a Dining Table Is Well Made.
Part 3 of "How to Tell the Quality of Fine Furniture" | Martin & MacArthur
Summary
Start by looking at the dining table from across the room. See whether the top and the base look balanced together, and check that there’s room for the chairs you need. Up close, follow the pattern in the wood. Check that any sections added to lengthen the table sit even with the top. Run a finger across the corner joints to check for gaps, and slide your palm over the top to feel the finish. Then look at how the legs or the central support, called a pedestal, attach to the top. Give the empty table a gentle push to see if it rocks. Before buying, picture the table from the places you’ll actually see it at home.

Look at the whole table.
As with a dresser, the first thing to look at is the whole piece. Stand back and walk around the table.
Look at it from an end as well as from the side. Notice the outline of the whole table, also called its silhouette.
Compare the thickness of the top with the size of the legs or central support. From the side and the end, see whether the base looks in proportion to the top.
Then look at the shape.
A racetrack top has straight sides and curved ends. A rectangular top has straight sides and corners. Rounded rectangles and other variations can change where chairs fit, especially near the ends.
Allow about 24 inches of usable space per person along each side as a starting point. Three people on a side generally need about 72 inches where chairs can actually fit.
On a racetrack table, pay attention to where the ends begin to curve. On a table with corner legs, check the distance between the legs.
Pull up the chairs you plan to use, especially chairs with arms, and check knee and elbow room with the end chairs in place.

Look at the tabletop.
Follow the shape of the table top and how grain comes together.
Stand where you can see the whole surface. Follow the grain, the natural lines and patterns in the wood, across the lines where the boards meet and look at how the neighboring boards work together.
Koa naturally varies in color and can have ripples in its grain, known as curl. Stand back and see whether the lighter and darker boards and their patterns look balanced across the top. Then look up close to see how the boards meet.
Lay your palm flat and move it slowly across the top. Lacquer is a protective finish applied to the wood. A lacquered surface can feel smooth and still let you sense the character of the wood.
A fine furniture finish lets you feel the wood under your hand. The surface should not feel synthetic or plasticky like a poured-resin bar counter.
Slide your hand from the middle toward the edge. Notice whether the surface feels even as you go. Then, feel along the edge for rough patches or raised spots where the finish has collected or bubbled. These are always signs of poor workmanship
Bookmatching is one way to arrange the grain. The maker opens two consecutive slices of wood like the pages of a book, placing them side by side so the grain forms a near-mirror image across the seam. A maker can also arrange boards for a more continuous flow of grain and tone.
Open the table and inspect every leaf.
Extension leaves are extra sections of tabletop that make the table longer. If the table has them, ask to see it with all of them in place.

Ask whether the leaves were made with the table or added later. Inspecting the extended table shows how well the pieces fit visually and physically.
Look at the color and pattern of the wood on both sides of each line where the pieces meet. Leaves made as part of the original design should look at home in the extended top.
Some patterns carry across the seams. Others use leaves with a compatible tone and grain.
Look under the table
Bend down until your eyes are nearly level with the top. Look across each joint and run a fingertip over it to check whether one section sits higher than the next. The leaves should sit level with the rest of the top.
Follow the edge or trim of the tabletop
Run your hand along the tabletop edge. If the edge is straight and flat, look for an even line and a smooth finish. If it’s rounded or carved, follow that shape around the corner.

Any decorative border or trim should line up where the pieces meet and should convey intentional design.
A miter is a joint where two pieces of wood are cut at an angle to meet at a corner. You can see the seam, the thin line where the pieces meet. The wood should meet all along that line with no open space between the pieces.
Run a fingertip across the seam of the miter. It should feel completely smooth, with no dip, bump, or step.
Check every corner for the same fit. Use the same eye and fingertip check wherever two fixed pieces of wood meet.
Look just below the tabletop for the apron. This is the frame you can see along the sides of many tables. Follow the lower edge of the apron around the table. At each corner, look where the apron meets the leg.
Check that the pieces meet without gaps and that any curve or carved detail follows the same shape from corner to corner.
Feel the finish
Tables with Legs
Look underneath at the legs. Follow each leg from the corner to the floor. Does it narrow toward the floor, curve, or have a carved shape? See how it meets the apron or top. Look for a thin, closed line where the leg meets the frame or top. Step back and see whether the leg’s curve or straight lines fit the shape above it. Compare the color of the legs with the top in the same light to see how they look together.
Tables with a pedestal
View the pedestal from the side and from the end. Does its shape suit the tabletop? Look at how wide the base is where it meets the floor.
Then look at how far the tabletop sticks out beyond it on each side. Pay particular attention to those outer edges when you check for rocking. If the table extends, inspect the base with the leaves in place, too. Look underneath at how the pedestal and top are joined.

Stability and leveling
With the table empty, apply light pressure near different edges and watch for rocking or lifting at a foot. Ask whether the legs or pedestal have adjustable leveling feet. These are small pads under the base that can be raised or lowered.
Have the salesperson show you how they work. Levelers can help the base sit firmly on an uneven floor. Once the feet make firm contact with the floor, repeat the gentle push.
Watch where the leg or pedestal meets the top. The pieces should stay firm where they join.
If the top is solid wood, ask the salesperson to point out how it’s attached underneath. Wood gets a little wider or narrower as the air gets more or less humid.
Ask how the joinery leaves room for that movement while holding the top firmly.
Picture the table in your home
In a great room, you might see the table from the sofa, the kitchen, or across the room. Those open views make the legs or pedestal a prominent part of the design.
In a smaller dining room, you may see the table mostly from the doorway, with the chairs and tabletop in view. Stand where you normally enter the room and picture how much of the base you’ll see.

Consider the other furniture pieces in your room with the table.
A table with a distinctive grain can complement a sideboard with a similar warmth in its wood tone. A curved pedestal might echo the backs of your chairs.
Even pieces from the same collection can vary in color when they’re made of natural wood.
Look for a table that has a character of its own and feels at home alongside the other furnishings.
Frequently asked questions
-
How can I tell if a dining table is well made?
Start with its proportions. Then look for edges that keep the same shape, joints where the wood meets without gaps, and a base that sits firmly. If the table extends, inspect it with every leaf installed.
-
What is a racetrack dining table?
A racetrack table has straight sides and curved ends. When planning seating, check how the curves affect the usable space near the end chairs.
-
How much space should I allow per person at a dining table?
Start with about 24 inches per person along each side. Measure the clear space between the legs and try the chairs you plan to use. Wide chairs or chairs with arms may need more room.
-
What does bookmatched wood mean?
Two consecutive slices of wood are opened like the pages of a book. Their grain forms a near-mirror image where the slices meet.
-
How can I tell if extension leaves were made for the table?
Ask whether the leaves were made with the table and have the seller put them all in place. Check whether the leaves sit even with the tabletop, whether the edges line up, and whether the wood tone and grain work across the seams.
-
What does a well-made miter look like?
You may see the thin line where the two angled pieces meet. The wood should touch all along that line, with no space between the pieces. Run a fingertip across the seam. It should feel smooth, with no dip, bump, or step. Check for the same fit at each corner.
-
What is the apron on a dining table?
The apron is the frame just beneath the tabletop on many designs. On many tables with legs, it’s the strip of wood you see spanning the space between them.
-
Can a lacquered tabletop still feel like wood?
Yes. A lacquered top can be smooth and retain some sense of the wood’s texture. Gloss alone tells you little about how the surface will feel, so run your hand across it.
-
How do I check a dining table on an uneven floor?
Ask whether the legs or pedestal have small feet you can raise or lower. Once the base sits firmly, apply light pressure near different edges and check for movement in the base or its joints.
-
Should my dining table match my other furniture?
Look for a feature the pieces share, such as warm wood tones, related shapes, or a similar scale. The table can have its own grain and finish while complementing the room.
Conclusion
Take the time to see the table the way you’ll use it. Pull up the chairs, install every leaf, feel the finish, and look underneath at the base. Then step back again. A well-made table should feel steady, seat the people you want to gather, and look as carefully considered from across the room as it does up close.
Martin & Macarthur Team
The Martin & Macarthur Team is dedicated to sharing inspiring stories, expert insights, and thoughtful guidance on timeless craftsmanship and meaningful gifting. With deep expertise in sustainable luxury and modern design, the team curates content around premium koa wood watches, elegant jewelry, and lifestyle pieces that beautifully blend Hawaiian heritage with contemporary style.